New addition to Atlona HDMI Matrix switchers family: ATLONA 8x5 PRO HDMI MATRIX SWITCH OVER CAT5/6 WITH 3D SUPPORT AT-PROHD85M-SR

NEW ATLONA 8x5 PRO HDMI MATRIX SWITCH OVER CAT5/6 WITH 3D SUPPORT-AT-PROHD85M-SR

Atlona 8x5 HDMI Matrix Switch over CAT5/6 with 3D Support. (5 x HDMI Receivers are inlcuded) Model: AT-PROHD85M-SR

The AT-PROHD85M-SR is a true 8x5 HDMI matrix switch. The PROHD85M matrix features eight HDMI inputs and five CAT5/6/7 twisted pair outputs. The matrix design allows independant input and output switching for all channels. Twisted Pair outputs are used to connect to the 5x included receiver modules.

The AT-PROHD85M-SR has the ability of equalization, amplification and re-clocking the signal to ensure an HDMI signal transmission through long cables without signal quality loss. The transmission distance for twisted pair (CAT5/6) outputs can reach up to 165ft @ 1080P and 250ft if CAT7 is used. Distance can be extended an additional 165ft with the optional Atlona repeater AT-PROHD-RP. It is recommended to use CAT6 (568B terminated) wire to achieve longer distances.

The Atlona 8x5 Matrix can be controlled through : IR back channel, RS232, RS485, TCP/IP (LAN) or/and supplied remote control.

Note1: The AT-PROHD85M-SR comes with 5 x Receiver modules so there is no need to purchase additional hardware.

Note2: The AT-PROHD85M-SR is able to work on a single CAT5/6/7 cable, however IR pass-through will no longer be functional.

Features:

• Allows up to eight HDMI sources to be independently switched to 5 HDMI video displays.


• Each RJ45 CAT5 zone output supports either dual or single CAT5.


• HDMI source to HDMI video display extension up to 165ft @ 1080p and 1920 x 1200 through CAT5.


• IR signal extension from supplied receivers to AT-PROHD85M-SR for local equipment rack source control.


• AT-PROHD85M-SR matrix switch can be controlled by IR, RS-232, RS485, TCP/IP or from the front panel.


• Supports HD resolutions up to 1080p or 1920 x 1200


• Rack mount 2U


• Pass through Digital Audio for all formats up to and including Dolby True HD and DTS-HD Master Audio


• Supports 3D


• HDCP and EDID compatible


• Rack mountable (2U)

Technical Specifications:

• Input DDC signal: 12V (matrix) and 5V (receivers)


• Video format supported: HDTV up to 1080p and computer up to 1920 x 1200


• Audio format supported: Pass through for all digital audio formats up to and including Dolby True HD and DTS-HD Master Audio


• Output video: HDMI + HDCP 1.3


• Maximum distance for RJ45 outputs: 165ft (50m) through CAT5/6 cables and up to 250ft (80m) @ 1080p on CAT7 cable


• Power consumption: 35 watts (max)


• Dimensions: 17.3”L x 11”W x 3.5”H (440mmL x 280mmW x 88mmH)


• Weight (main unit): 10.01lbs (4.6kg)


• Operating temperature range: -41 to +95ºF (-5 to +35ºC)

Package Includes:

• 1 x AT-PROHD85M-SR (main switch)


• 5 x AT-PROHD85M-R (receiver)


• 1 x IR handheld remote control


• 1 x 12V 5A DC power supply (110/240V universal) for main switch


• 5 x 5V 1A DC power supply (110/240V universal) for receivers


• 5 x receiver mounting brackets including screws


• 6 x IR RX (IR receiver cable)


• 8 x IR TX (IR emitter cable)


• 1 x USB to RS-232 (DB-9) cable (PC to matrix control cable)


• 1 x RS-485 to RS-232 adaptor (extends an RS-232 connection over CAT5 from the matrix switches RS-485 port)


• 1 pair Rack mounting ears including screws


• 1 x instructional manual

Warranty:

• 3 years parts and labor

BZB Express ships ATLONA 16x16:2 HDMI MATRIX SWITCH WITH CAT5/6 AND LOCAL HDMI OUTPUTS WITH 3D SUPPORT

BZB Express would like to reintroduce the biggest hit of 2010, and the most advanced true 16x16 HDMI switcher by Atlona: ATLONA 16x16:2 HDMI MATRIX SWITCH WITH CAT5/6 AND LOCAL HDMI OUTPUTS WITH 3D SUPPORT. Model: AT-PROHD1616M-SR

The Atlona AT-PROHD1616M-SR is a True 16x16:2 HDMI matrix switch. The PROHD1616M unit features sixteen HDMI 1.3 inputs, and sixteen independently switchable HDMI + Twister Pair outputs to feed sixteen separate displays simultaneously. Each output features 1 x HDMI and 2 x Twisted Pair connections where both are active at the same time. Twisted Pair outputs are used to connect to the 16 x included receiver modules

The AT-PROHD1616M-SR has the ability of equalization, amplification and re-clocking the signal over HDMI to ensure accurate signal transmission through long cables without quality loss. The transmission distance of Twister Pair (CAT5/6) outputs can reach up to 165ft @ 1080P with infrared control signal. Distance can be extended for additional 165ft with an optional Atlona repeater unit AT-PROHD-RP. It is recommended to use CAT6 (568B terminated) wire to get the longer distance.

The Atlona 16x16:2 Matrix can be controlled through : Front Panel Touch Screen, IR Back Channel, RS232, RS485, TCP/IP (LAN) or/and supplied remote control.

Note1: The AT-PROHD1616M-SR comes with 16 x Receiver modules, there is no need to purchase additional hardware

Note2: The AT-PROHD1616M-SR is able to work on a single CAT5/6/7 cable; however special software is required (The IR pass-through will no longer work in this case).

Features:

• 3D Capable


• Supporting the latest (HDMI1.3) 36 bit deep color standard, it can be connected even to the latest BluRay players, set top boxes, AV receivers or Apple TV.


• HDCP 1.1 and DVI1.0 compliant


• Supports high resolution up to 1920x1200 or 1080p over local HDMI or included Twister Pair receiver modules


• The 16 outputs are capable of displaying the same or different sources simultaneously. Each output includes one HDMI A type connector and a set of dual RJ45 connectors as the second mirrored HDMI output. The two outputs work simultaneously.


• Supports all latest HDMI audio formats including Dolby TrueHD and DTS-HD


• EDID management function stores 100 most common EDID recordings with ability of programming new EDID recording by the user


• Reclocking for both inputs and outputs allows long HDMI cables to be used on both inputs and outputs


• Supports 6 x control options: Panel buttons, Local IR, IR call back from remote locations, RS232, RS485 and TCP/IP (LAN).


• IR commands and RS232 commands are provided


• Use any remote to control the switch, switch is capable of recording any IR commands and user can choose what they mean.


• Silicon Image Chip-Sets allow 99.99% compatibility with all the AV gear (we only use the best). Silicon Image was a creator of the HDMI standard.


• Rack Mountable (comes with rack ears)


• Control4, RTI, Crestron, AMX compatible


• Easy installation

Technical Specifications:

• Video Bandwidth: 6.75Gbps


• Max Resolution : 1080p/1920 x 1200


• HDTV Formats Supported: 1080P/1080i/720P/576P/480P/576i/480i


• PC Formats Supported: VGA, SVGA, XGA, SXGA, UXGA, WXGA,WSXGA, WUXGA


• Audio Format Supported: DTS-HD, Dolby trueHD, 7.1ch and others


• Max. HDMI Cable Input Distance: 50ft


• Max. HDMI Cable output Distance: 50ft


• Max. Twister Pair output Distance 165ft @1080p (optional repeaters are available to add additional 165ft Model is AT-PROHD-RP)


• Twister Pair Type: CAT5/6/7 (568B termination)


• Power Consumption: Main Unit: 60wtts (Max); Receiver Unit 100mwtts (Max)


• Dimensions (Inch): Main Unit:17.32W×13.78H×15.35D Receiver:1.8W×0.8H×3.3D


• Rack Height: 6U


• Net Weight: Main Unit: 44.1 LB; Receiver Unit: 0.6LB

Package Includes:

Main Unit:

• 1 x AT-PROHD1616M-SR


• 16 x IR emitter cables (marked IR TX),


• 1 x IR receiver cables (marked IR RX)


• 1 x USB to RS232 cable


• 1 x 12VDC Universal Power Supply. (UL Listed)


• 1 x Rack Mounting ears.


• 1 x IR Remote.

Receiver Modules:

• 16 x Receiver Units AT-PROHD1616M-R


• 16 x IR receiver cables (marked IR RX),


• 16 x 5VDC power supply (power supply for receiver modules will not be required under normal conditions)


• 16 x Rack Mounting ears.


• 1 x Operating Instructions.


• 1 x CD with RS232 commands and control software.

BZB Expresss Introduces New Atlona 4x1 HDMI KVM Switch

Atlona 4x1 HDMI KVM Switch. Model: AT-HDKVM-V41

The Atlona AT-HDKVM-V41 is 4 input 1 output HDMI KVM switch designed to allow user to have 4 computers and one display, while utilizing the same keyboard and mouse across all of the computers.

The switch between computers may easily be done through either push-buttons on the front panel of the switch, or through Hot Key selection.

The HDKVM series of switchers is based on the latest HDMI standard and is therefore capable of fully displaying uncompressed digital video with resolutions up to 1920x1200 or 1080p along with high resolution audio, including Dolby TrueHD and DTS-HD Master Audio.

Note: For those who only have 2 computers, please check-out another Atlona product AT-HDKVM-V21

Applications:

Office use: Most of the jobs that involve graphics design, video editing, programming, accounting very often require 2 or more computers; however usually it is impossible to use more than one monitor and multiple keyboards or mice. The HDKVM solution is perfect solution for such an application.

QA: Quality Assurance Engineers that test systems on different platforms such as Windows, Mac OS, Linux or any other, will definitely require multiple computers at their stations. The HDKVM is a great solution which will allow user to quickly switch between operating systems where still using one keyboard, mouse and display.

Features:

• Supports extremely high resolutions up to 1920x1200 or 1080p


• Plug and Play, no software needed


• OS support - Windows, Linux, and Mac (all versions)


• Supports Latest Digital Audio Formats up to Dolby TrueHD and DTS-HD Master Audio Allows users of multiple computers to have a single keyboard, single mouse and a single monitor


• Allows a use of either USB or PS2 keyboard and mouse


• 3D Capable


• Supports 30/36/48 bit color depth display


• Auto Signal Enhancement feature can improve signal quality after long distance transmission

Technical Specifications:

• Inputs: 4 x HDMI, 4 x USB (type B)


• Outputs: 1 x HDMI, 2 x USB (type A), 2 x PS2


• OS Support: Windows, Mac OS, Linux (Plug and Play, no software required)


• Max. Resolution Support: up to 1920x1200 or 1080p


• HDCP/EDID: Compliant


• Power Supply: 5V/2A (110/240V universal)


• Dimensions: 7.87x2.9x1.65inch / 200x75x42mm


• Weight: 1.4LB/0.65kg